I just updated the script right now to 0.2.12. Most are small changes but there is one noticeable change.
- Groupings creation used to have instructions but got hidden by mistake. It is now fixed.
- Most options that are changed will be checked for limits so it won't cause problems with timers.
- Added more help tips on the menu buttons.
The major update I added was two more cycle timers. You will see 3 number buttons at the top. Each one refers to how fast the script will check for pandas. So instead of just one you can switch to other timers easily. So timer 1 is the fastest at 980ms. This will grab panda's as fast as possible if no other scripts running and you're not working from your queue. Timer 2 is a slower timer at 1400ms or about 1.5 seconds. This timer would be used when you want to use other scripts at the same time like turkmaster, hitmonitor or hitscraper. Timer 3 is very slow at over 2 seconds and could be used for using other scripts and working fast from your queue with little pre's interfering. All these timers can be changed to suit your preference. The reset timer button will reset back to the current timer you have selected and not to the fastest.
Now because this script will slow down if it gets too many pre's then you should run any other scripts first. Make sure they aren't going too fast. Once you have the other scripts running you can start collecting with this script. Watch the elapsed time stat at the top. You will see the number increasing. Once it becomes stable then that is a perfect timer for your cycle timer 2. You can do a similar thing for cycle timer 3 too. When you don't need the other script then click on the button 1 to go back to the fastest timer. These timers can be very useful and efficient if you can figure out the best timers for all scripts running.
