12/28 - Tickle Thursday!

[basketcasey]

I’m sorry. I didn’t realize that I was going to be taken seriously.

Send me more goldfish pics please.

 

[Starslip]

That's about $50 under paying.

It's over a dollar per audio minute, if the audio isn't terrible isn't that decent?

 

[Handsome Bob]

Do a lot of you guys use PC and HC the same time. I like PC cause I'm so used to it but HC is nice because it has the panda button when you click a hit you missed. So you don't have to copy past from HF to PC and add a job. I'm just worried using both will slow down their effectiveness.

 

[Starslip]

Do a lot of you guys use PC and HC the same time. I like PC cause I'm so used to it but HC is nice because it has the panda button when you click a hit you missed. So you don't have to copy past from HF to PC and add a job. I'm just worried using both will slow down their effectiveness.

If it's not driving your page errors up too much I don't see a problem.

 

[InfiniteChanges]

Do a lot of you guys use PC and HC the same time. I like PC cause I'm so used to it but HC is nice because it has the panda button when you click a hit you missed. So you don't have to copy past from HF to PC and add a job. I'm just worried using both will slow down their effectiveness.

Correct, using both will slow you down as you'll get endless PREs.

 

[InfiniteChanges]

Do a lot of you guys use PC and HC the same time. I like PC cause I'm so used to it but HC is nice because it has the panda button when you click a hit you missed. So you don't have to copy past from HF to PC and add a job. I'm just worried using both will slow down their effectiveness.

Really it depends on which scraper you are usings. If you are using HIT Finder, use HC. If you are using HIT Forker then use PC. Both of them have one button panda adds.

 

[Handsome Bob]

Correct, using both will slow you down as you'll get endless PREs.

I dont get pre's but when I look at my pc it'll say I have so and so many pre's [edit] when I say pre I mean when Im on myturk on the exceeded message pops up

Really it depends on which scraper you are usings. If you are using HIT Finder, use HC. If you are using HIT Forker then use PC. Both of them have one button panda adds.

Thanks I use HF. I haven't messed with HC too much but can you make a requester search on their for like C-stats for example so it tries to catch all the different HITS when they post. Never had luck on that with PC anyways usually get like 3

 

[JenniLeigh]

Send me more goldfish pics please.

:o
what a hussy!

 

[Jharkan]

I dont get pre's but when I look at my pc it'll say I have so and so many pre's [edit] when I say pre I mean when Im on myturk on the exceeded message pops up

Thanks I use HF. I haven't messed with HC too much but can you make a requester search on their for like C-stats for example so it tries to catch all the different HITS when they post. Never had luck on that with PC anyways usually get like 3

when you do a requester search with PC, it will only search for the first three groupIDs that it finds for that requester.
after it has "seen" three different csat hits, it will not catch a fourth, different groupID

 

[InfiniteChanges]

when you do a requester search with PC, it will only search for the first three groupIDs that it finds for that requester.
after it has "seen" three different csat hits, it will not catch a fourth, different groupID

Ummm, no. I caught 9 different C-Stats yesterday within 5 minutes. I think the max I've seen is 100+.

 

[Daniel]

Title: Headphones needed to watch a short video. Get $0.50 for participating in a 3-4 minute survey about the speaker in the video. | Accept Requester: Jaime Potter [A1P3QCQVNCJQFM] Contact TV: No Reviews TO: [Pay: 4.50] [Fast: 5.00] [Comm: 5.00] [Fair: 5.00] [Reviews: 6] [ToS: 0] TO2: No Reviews Reward: $0.50 Duration: 1 hour Available: 1 Description: Please watch the video contained in the link in its entirety in one sitting, then complete all of the survey questions immediately afterwards. Please only participate once in this study. Thank you! Requirements: Total approved HITs GreaterThanOrEqualTo 0; HIT approval rate (%) GreaterThanOrEqualTo 92; Location EqualTo US [tr][td] HIT exported from Mturk Suite v2.0.9​

[/td][/tr]

[tr][td][/td][/tr]

 

[Handsome Bob]

Ummm, no. I caught 9 different C-Stats yesterday within 5 minutes. I think the max I've seen is 100+.

Clearly I'm doing something wrong. I see people in here catch a ton of them.

 

[Handsome Bob]

when you do a requester search with PC, it will only search for the first three groupIDs that it finds for that requester.
after it has "seen" three different csat hits, it will not catch a fourth, different groupID

Did not know that thanks

 

[Jharkan]

Ummm, no. I caught 9 different C-Stats yesterday within 5 minutes. I think the max I've seen is 100+.

http://pandacrazy.allbyjohn.com/help/jobs/save-search-group-id-mode

maybe I'm misunderstanding it, but I swear I remember @Johnnyrs saying that if the outside boundaries are NOT red, it will collect and search for up to three different group IDs. if it's red, it will only look for the same groupID that's last saved in its details

http://pandacrazy.allbyjohn.com/help/jobs/edit-advanced-details/action-mode

The search mode will use a search url on the requester ID to find any hits. If you change to the search mode you must have a Requester ID filled in or it won't let you save it. The script can't figure out requester ID's by a panda because usually mturk doesn't display that info on a hit. When the job is in Search Mode it will do a search and try to panda the top three highest paid hits it finds.

• To find out more details on Search mode go to Search Mode Topic.

 

[Handsome Bob]

http://pandacrazy.allbyjohn.com/help/jobs/save-search-group-id-mode

maybe I'm misunderstanding it, but I swear I remember @Johnnyrs saying that if the outside boundaries are NOT red, it will collect and search for up to three different group IDs. if it's red, it will only look for the same groupID that's last saved in its details

I read all his info about pc on his site and it was hard for me to understand it all. This was months ago maybe I'll give it another read.

 

[Daniel]

Title: Headphones needed to watch a short video. Get $0.50 for participating in a 3-4 minute survey about the speaker in the video. | Accept Requester: Jaime Potter [A1P3QCQVNCJQFM] Contact TV: No Reviews TO: [Pay: 4.50] [Fast: 5.00] [Comm: 5.00] [Fair: 5.00] [Reviews: 6] [ToS: 0] TO2: No Reviews Reward: $0.50 Duration: 1 hour Available: 1 Description: Please watch the video contained in the link in its entirety in one sitting, then complete all of the survey questions immediately afterwards. Please only participate once in this study. Thank you! Requirements: Total approved HITs GreaterThanOrEqualTo 0; HIT approval rate (%) GreaterThanOrEqualTo 92; Location EqualTo US [tr][td] HIT exported from Mturk Suite v2.0.9​

[/td][/tr]

[tr][td][/td][/tr]

3 min

 

[Handsome Bob]

Seems john does load a bit faster if you que them up. Am i right on that?

 

[InfiniteChanges]

http://pandacrazy.allbyjohn.com/help/jobs/save-search-group-id-mode

maybe I'm misunderstanding it, but I swear I remember @Johnnyrs saying that if the outside boundaries are NOT red, it will collect and search for up to three different group IDs. if it's red, it will only look for the same groupID that's last saved in its details

http://pandacrazy.allbyjohn.com/help/jobs/edit-advanced-details/action-mode

The search mode will use a search url on the requester ID to find any hits. If you change to the search mode you must have a Requester ID filled in or it won't let you save it. The script can't figure out requester ID's by a panda because usually mturk doesn't display that info on a hit. When the job is in Search Mode it will do a search and try to panda the top three highest paid hits it finds.

• To find out more details on Search mode go to Search Mode Topic.

I think what you're thinking of is when there are multiple HITs from a requester available it will grab the three highest paying HITs. However, with say C-Stats, it will log each GroupID it comes across and search for an avaialble HIT. So say you've found 12 GroupIDs, it's going to start at the top and if the first one is available, it grabs a HIT, if the second GroupID is available it will grab the HIT, if the third GroupID is available it will grab the HIT and go back to the first HIT to start again. If, however, two and three are not available, it will seach the fourth GroupID on the list, then the fifth (if both are grabbed it goes back to the first HIT again).

 

[InfiniteChanges]

Seems john does load a bit faster if you que them up. Am i right on that?

Honestly, no idea, I stay away from $6 hr batches. Not worth the time.

 

[SweetiePuff]

Honestly, no idea, I stay away from $6 hr batches. Not worth the time.

They are worth the time investment if nothing else is up, you're new and need to build numbers and/or are using a script to make them worth more than $6/hr *grins*