10/10 - Trick Daddy Tuesday!

[ChristopherASA]

I need a diamond.

I need a life.

 

[Kerek]

Still, though, I'd pay $2500 for a wife.

 

[Deleted member 526]

$7 to freedom

 

[Liz]

Still, though, I'd pay $2500 for a wife.

Sold

 

[Kuddish]

All my Noblis approved. Strange they approved this early. Usually 3 day AA

 

[Jaded]

Still, though, I'd pay $2500 for a wife.

:o

 

[C to the J]

Still, though, I'd pay $2500 for a wife.

The upkeep on those things gets expensive.

 

[Blue]

Still, though, I'd pay $2500 for a wife.

I made the ring I gave to my gf. Bought a gold coin off ebay... punched a hole through the center and hammered it down to a ring... buffed and polished it to a high sheen then embedded some laminated ebony wood into a groove using epoxy mixed with phosphorescent powder. It glows blue in the dark, shines under black light... and looks pretty darn stylish in daylight. I was super proud of myself. Took 3 attempts and nearly 4 months of work.

 

[Liz]

I made the ring I gave to my gf. Bought a gold coin off ebay... punched a hole through the center and hammered it down to a ring... buffed and polished it to a high sheen then embedded some laminated ebony wood into a groove using epoxy mixed with phosphorescent powder. It glows blue in the dark, shines under black light... and looks pretty darn stylish in daylight. I was super proud of myself. Took 3 attempts and nearly 4 months of work.

 

[LowCalCalzone]

 

[C to the J]

I made the ring I gave to my gf. Bought a gold coin off ebay... punched a hole through the center and hammered it down to a ring... buffed and polished it to a high sheen then embedded some laminated ebony wood into a groove using epoxy mixed with phosphorescent powder. It glows blue in the dark, shines under black light... and looks pretty darn stylish in daylight. I was super proud of myself. Took 3 attempts and nearly 4 months of work.

You make Ron Swanson proud.

 

[alk69]

I need a diamond.

I need a nap....I'll just ask for sumthin I might get.....and sumthin of some real use.

 

[Kerek]

I made the ring I gave to my gf. Bought a gold coin off ebay... punched a hole through the center and hammered it down to a ring... buffed and polished it to a high sheen then embedded some laminated ebony wood into a groove using epoxy mixed with phosphorescent powder. It glows blue in the dark, shines under black light... and looks pretty darn stylish in daylight. I was super proud of myself. Took 3 attempts and nearly 4 months of work.

Yeah but I'm a skillless piece of shit and all I have is money.

 

[Michele]

Title: Product to Interest Audit (single yes/no per HIT) | PANDA Worker: Preview | Accept | Requester Requester: Amazon Requester Inc. - Customer Interests [A225CX8SZ86ADP] (Contact) TO 1: [Pay: 3.48] [Fast: 4.70] [Comm: 0.00] [Fair: 5.00] [Reviews: 30] [ToS: 0] TO 2: [Rate: $5.54/hr] [Pen: 0.52 days] [Res: -- of 0] [Rec: 100% of 2] [Rej: 0] [ToS: 0] [Brk: 0] Reward: $0.01 Duration: 5 minutes Available: 217 Description: Confirm labeling of products with interest (e.g. 'underwater photography', 'game of thrones' etc). Single yes/no per HIT, average estimated time < 5 seconds. Requirements: Total approved HITs is not less than 1000; Location is one of: CA, US; HIT approval rate (%) is not less than 98;

HIT exported from Mturk Suite v1.25.7​

 

[Jaded]

Yeah but I'm a skillless piece of shit and all I have is money.

 

[C to the J]

Yeah but I'm a skillless piece of shit and all I have is money.

 

[ChristopherASA]

I made the ring I gave to my gf. Bought a gold coin off ebay... punched a hole through the center and hammered it down to a ring... buffed and polished it to a high sheen then embedded some laminated ebony wood into a groove using epoxy mixed with phosphorescent powder. It glows blue in the dark, shines under black light... and looks pretty darn stylish in daylight. I was super proud of myself. Took 3 attempts and nearly 4 months of work.

 

[Blue]

Yeah but I'm a skillless piece of shit and all I have is money.

Everyone I know acted like I was batshit insane and independently wealthy (buying a lot of expensive tools)... but it honestly wasn't that bad. I did all of the buffing/grinding with a dremel tool as well as cutting the groove for the wood... that and a hammer were the only tools I used. I took all three coins to a metal fabrication place and asked them kindly to punch the holes for me... took them less than 2 minutes. I took it over to a jeweler to have them fine tune the sizing on their mendel for $30 before I started work with the wood. The wood was just super thin shaved ebony that I coated with glue then wrapped around a dowel rod to dry. The epoxy came from lowes... cost $13 I think... the phosphorescent powder came from amazon and cost another 10 or 12 bucks.

I say it took me 3 attempts because it really did... I've never made a ring before... had no idea where to start... so I started by watching videos on youtube... fucked up the first two learning and nailed the third one.

 

[coffeeowl]

Swag Code: http://www.swagbucks.com/offer?oid=7695&trkId=2ouv

@Jaded @JenniLeigh

 

[TurkingMaster]

All my Noblis approved. Strange they approved this early. Usually 3 day AA

Same now I can afford that Big Mac from McD's